Concrete

Should Concrete Contractors Take a Deposit?

The Brivium Team8 min read
Should Concrete Contractors Take a Deposit? illustration

Concrete is material-heavy work. You front money for ready-mix, rebar, forms, gravel, and labor before you ever see a dime from the customer. So the question comes up on almost every job: should you take a deposit on concrete work, and if so, how much? The short answer is yes, on most jobs above a certain size. The longer answer is about timing, amount, and how you explain it so the homeowner or GC nods instead of flinching.

Key takeaways

  • Take a concrete deposit on most jobs big enough to require a material order, typically anything over a few thousand dollars.
  • A deposit in the 25 to 50 percent range is standard and defensible when you tie it to material and mobilization costs.
  • Explain the deposit in terms of materials and scheduling, not distrust, and put it in writing on the quote.
  • Deposits protect your cash flow and weed out tire-kickers before you pour your time into a job.

Why a Deposit Matters More in Concrete Than Other Trades

A lot of trades can show up with a van full of parts and bill at the end. Concrete does not work that way. Once you schedule a pour, you are committing to a ready-mix order, a crew, and often rental equipment, all of which cost money before the first wheelbarrow rolls. If the customer backs out the night before, or pays slow after the slab cures, you are the one carrying the loss.

A deposit does three things at once. It covers your upfront material and mobilization costs so you are not financing the customer's project out of your own pocket. It confirms the customer is serious, because people who put money down rarely ghost you. And it anchors the whole payment conversation up front, when the customer is excited about their new driveway, instead of after the work is done and the excitement has worn off.

The real risk

The danger is not usually a customer refusing to pay at all. It is slow payment on a job where you already spent thousands on concrete. A deposit closes that gap.

When You Should Ask for a Deposit

Not every job needs one, and asking for a deposit on a tiny repair can make you look nickel-and-dime. Here is a simple rule set that most concrete crews can live with.

  • Small repairs or patch jobs under a couple thousand dollars: often fine to bill on completion, especially for repeat customers.
  • Anything that requires a material order or a scheduled pour: take a deposit.
  • New customers you have never worked with: lean toward taking a deposit regardless of size.
  • Large residential jobs like driveways, patios, and foundations: deposit plus a progress schedule for bigger pours.
  • Commercial or GC work: follow the contract terms, which often means net 30 but still a deposit or mobilization payment up front when you can get it.

The dividing line is almost always whether you have to spend money before the job to do the job. If the answer is yes, that money should not come out of your account alone.

How Much to Charge: The 25 to 50 Percent Range

Most concrete contractors land somewhere between 25 and 50 percent for a deposit. Where you fall depends on how material-heavy the job is. A driveway that is 70 percent materials and mobilization justifies a higher deposit than a job that is mostly labor and finishing. The key is that your deposit should at least cover what you spend before you get paid again.

Here is a worked example. Say you quote a residential driveway at 12,000 dollars. Your costs break down roughly like this:

  • Ready-mix concrete: 3,200 dollars
  • Gravel base and rebar: 1,400 dollars
  • Forms, equipment rental, and fuel: 900 dollars
  • Labor for the pour and finish: 3,500 dollars
  • Overhead and profit: 3,000 dollars

Your hard material and mobilization costs before labor add up to about 5,500 dollars, which is roughly 46 percent of the job. A 40 percent deposit of 4,800 dollars gets you close to covering those costs without you fronting the whole thing. A 50 percent deposit of 6,000 dollars fully covers materials and gives you a cushion. Either is defensible. What you want to avoid is a 10 percent deposit that leaves you thousands in the hole the day you pour.

Rule of thumb

Your deposit should be at least equal to the material and mobilization cost you spend before you can bill again. Price it to cover your exposure, not to a number that just sounds nice.

How to Explain the Deposit So the Customer Says Yes

The deposit conversation goes sideways when it sounds like you do not trust the customer. Flip it. Frame the deposit as what covers their materials and locks in their spot on your calendar. Customers understand that concrete gets ordered and poured on a specific day, and that reserving that day costs something.

Try language like this: "The deposit covers your material order and reserves your pour date. Once that is in, I lock in the ready-mix and put your crew on the schedule." That turns the deposit from a hurdle into a step forward. It is the thing that makes their project real.

  1. Put the deposit amount and due date right on the written quote, so it is never a surprise.
  2. Tie it to a concrete action: ordering material and booking the pour date.
  3. Offer a clean way to pay, like a card or a payment link, so there is no friction.
  4. Confirm the remaining balance terms in the same breath, for example balance due on completion.

When the deposit is in writing and tied to a benefit the customer wants, most people pay it without a second thought. The ones who hesitate hard at a reasonable deposit are often the same ones who would have paid slow or disputed the final bill. Better to find that out before you pour.

Structuring Deposits and Progress Payments on Bigger Jobs

On larger pours, a single deposit may not be enough to keep you cash-flow positive through the whole job. Break payment into stages that match your spend. A common structure for a bigger residential or light commercial job looks like this:

  • Deposit at signing to cover materials and mobilization, often 30 to 50 percent.
  • Progress payment at a milestone, such as after prep and forming or after the pour.
  • Final balance on completion and customer walkthrough.

The point is to never let the amount of money you have spent get far ahead of the amount you have collected. Match your billing to your outflow and you stay in the black through the whole project, even if one stage runs long.

Protecting Your Cash Flow the Easy Way

A deposit policy only works if it is consistent and easy to collect. If taking a deposit means chasing a check, waiting days for it to clear, and manually tracking who paid what, you will skip it when you are busy, which is exactly when you need it most. The fix is to make deposits and payments part of your normal quoting flow instead of a separate chore.

Brivium lets you send a branded quote with the deposit built in, take the card payment on the spot, and drop the pour straight onto your schedule once the deposit clears, so getting paid up front is just part of booking the job.

Start free trial

Set the policy, put it on every quote, and make it painless to pay. Do that and the deposit stops being an awkward conversation and becomes the normal way your business works. Your cash flow smooths out, your schedule fills with serious customers, and you stop financing other people's driveways.

Frequently asked questions

Is it normal for concrete contractors to ask for a deposit?

Yes. Because concrete is material-heavy and requires scheduling a pour, most contractors take a deposit on any job large enough to require a material order, typically in the 25 to 50 percent range.

How much deposit should I take on a concrete job?

A good rule is to set the deposit to at least cover your material and mobilization costs before you can bill again. For most jobs that works out to 25 to 50 percent of the total.

How do I explain a deposit without sounding like I distrust the customer?

Frame it as covering their material order and reserving their pour date. Put the amount on the written quote and tie it to a clear action, so it feels like progress rather than a hurdle.

Should I take a deposit on small concrete repairs?

Often not. For small patch or repair jobs under a couple thousand dollars, especially with repeat customers, billing on completion is usually fine. Take a deposit when the job requires a material order or scheduled pour.

Quote faster. Win more jobs.

Brivium turns your estimate into a branded quote customers approve and pay online. Free for 14 days, no credit card required.

Start free trial