Roofing
Hiring Your First Roofing Employee

You are turning down work, answering the phone off a ladder, and quoting jobs at 9pm after a full day of tear-off. That is the point where most solo roofers start thinking about a first hire. The problem is that the decision feels scary because payroll is the one bill that shows up every two weeks whether it rained or not. This post walks through when the numbers actually justify hiring a roofing employee, what to hand off first, and how to keep jobs coordinated once more than one person is in the field.
Key takeaways
- Hire when you are consistently turning away or delaying profitable work, not just when you feel busy.
- Delegate the physical labor first, keep sales and final quality checks on yourself until the crew is proven.
- A clear daily plan and one source of truth for job details prevent the chaos that kills early crews.
- Budget for the fully loaded cost of an employee, not just their hourly wage.
Know when the numbers justify a hire
Being tired is not a hiring signal. Backed-up revenue is. The honest test: are you turning down or pushing out jobs you could profitably do if you had an extra set of hands? If you have two to four weeks of backlog that keeps rebuilding no matter how hard you push, demand is outrunning your capacity.
Run a quick gut check before you post a job. Look at the last 60 days: how many leads did you pass on, and how many jobs sat waiting because you could only be in one place? If those numbers add up to more than a new hire would cost, the math is already talking.
A simple rule of thumb
If adding a helper lets you complete even one extra small roof per week that you would otherwise lose, that one job often covers the week's labor cost with margin left over.
Understand the real cost of a roofing employee
The wage is not the number that matters. The fully loaded cost does. In roofing, workers' comp is the big one, and rates for roofing classifications are typically much higher than for office work. Add payroll taxes, liability coverage, and the hours you spend training instead of producing.
Here is a worked example using round numbers so you can plug in your own:
- Base wage: $22/hr at 40 hours = $880/week
- Payroll taxes (roughly 10 percent): about $88/week
- Workers' comp (roofing rates run high, assume a loaded figure): $200 to $350/week
- Fully loaded weekly cost: roughly $1,170 to $1,320
Now the revenue side. If that employee lets you complete one extra 25-square asphalt job per week at, say, $8,000 revenue and a 35 percent gross margin, that is about $2,800 in gross profit added. Even after the loaded labor cost of around $1,300, you clear roughly $1,500 of upside. The point is not the exact figures, which vary by market. The point is to run this on paper before you hire so you know the job pays for itself.
Decide what to delegate first
New owners often hand off the wrong thing. They keep swinging a hammer and give a stranger the customer relationship. Do the opposite. Your first hire should take physical load off you so you can protect the parts of the business only you can do right now: selling, quoting, and signing off on quality.
A sensible handoff order for a first roofing employee:
- Labor: tear-off, loading, carrying, cleanup, and ground support. Low risk, high relief.
- Routine installation under your eye: let them run a section while you inspect.
- Material staging and jobsite setup once they know your standards.
- Eventually, running a small job solo after they have proven consistency.
Hold back the two things that protect your business: final quality inspection and customer communication. A sloppy valve or a bad flashing detail becomes a callback and a reputation hit. Keep your eyes on the finished work until you fully trust the hire.
Keep jobs coordinated with more than one person in the field
The quiet killer of early crews is not skill, it is coordination. When you were solo, the whole job lived in your head. Add one person and that no longer works. Someone shows up to the wrong address, the dumpster is not scheduled, or the material drop is a day off, and you lose half a day of paid labor standing around.
Fix it with one source of truth that everyone checks. Before each day, your employee should know, without calling you:
- Which address, with gate codes or access notes
- What the job is and the scope for the day
- Where materials are and when they arrive
- Start time and who is responsible for cleanup and photos
Protect your margin
Idle crew time is pure loss. You pay the loaded labor cost whether they are working or waiting. A two-minute daily plan saves hours of paid standing around across a month.
Set expectations before the first day
Honest, specific expectations prevent most first-hire friction. Spell out start times, what counts as paid time, phone and photo requirements, safety rules, and what great finished work looks like to you. Roofing is dangerous, so safety is not a suggestion: fall protection, ladder setup, and heat awareness need to be non-negotiable from day one.
Also decide how you handle the paperwork side. Classify correctly from the start. A W-2 employee working under your direction, on your schedule, with your tools is usually an employee, not a 1099 contractor. Misclassifying to dodge comp and taxes is a gamble that ends badly if someone gets hurt. Talk to a payroll service or accountant early.
Build systems before you build a crew
The owners who scale past a first hire are the ones who wrote things down. If your quoting, scheduling, and invoicing live only in your head or a pile of texts, every new person multiplies the confusion. Put the repeatable stuff in one place so a second and third hire inherit a process instead of guesswork.
Start with the three workflows that touch every job: how you quote it, how you schedule and dispatch it, and how you get paid. When those are consistent, adding people is a staffing problem instead of a rebuild.
Brivium keeps those three workflows in one place: send branded quotes customers can approve fast, schedule and dispatch your new hire so everyone knows the plan, and get paid by card on site instead of chasing checks later.
Start free trialGoing from solo to a crew is the moment roofing stops being a job you do and starts being a business you run. Hire when the backlog justifies it, hand off the labor before the relationship, keep one clear plan for the day, and write your process down. Do that, and your first employee becomes the foundation for your second and third.
Final word
Your first hire will not be perfect, and neither were you on day one. Train patiently, inspect the work, protect the customer relationship, and watch the numbers every week. If the math keeps working, keep building.
Frequently asked questions
When should a solo roofer hire their first employee?
Hire when you consistently turn away or delay profitable work that an extra set of hands could complete. If backlog keeps rebuilding and the added job revenue covers the loaded labor cost, the numbers justify it.
What should I delegate first when hiring a roofing employee?
Start with physical labor: tear-off, carrying, cleanup, and ground support. Keep sales, customer communication, and final quality inspection on yourself until the new hire proves consistent.
How much does a roofing employee really cost?
Budget well beyond the hourly wage. Add payroll taxes, liability, and workers' comp, which runs high for roofing. The fully loaded cost is often 40 to 60 percent above the base wage, so run the math before you hire.
Should my first roofing hire be a W-2 employee or a 1099 contractor?
If they work on your schedule, under your direction, with your tools, they are usually a W-2 employee. Misclassifying to avoid comp and taxes is risky. Check with a payroll service or accountant before you hire.
