Remodeling
Hiring Your First Remodeling Employee

Every remodeler hits the same wall. You are good at the work, the referrals keep coming, and you cannot take another job without either dropping a ball or working until midnight. That is the point where hiring starts to make sense. But going from solo to a crew is a real shift, and the first hire is the one most likely to go sideways if you rush it. This post walks through when the numbers actually justify a hire, what to hand off first, and how to keep two or more people coordinated once nobody is standing next to you all day.
Key takeaways
- Hire when you are consistently turning down profitable work or your backlog stretches past 4 to 6 weeks, not just when you feel busy.
- Delegate the repeatable grunt work first (demo, prep, cleanup, material runs) so you stay on the skilled and client-facing parts.
- A second person in the field only pays off if communication is tight: shared schedule, clear daily scope, and a way to get updates without driving to the site.
- Budget for the full loaded cost of an employee, not just the hourly wage. Taxes, insurance, and downtime are real.
When the numbers actually justify a hire
Feeling busy is not the same as being ready to hire. The honest signals are financial and schedule-based. If you are regularly saying no to jobs you would have taken a year ago, or your start dates are pushing 4 to 6 weeks out, demand is outrunning your capacity. That is the real trigger.
The other half is margin. An employee has to generate more revenue than they cost, including the overhead you do not see on the paycheck. A good rule of thumb in remodeling is that a productive field employee should bill out at roughly 2.5 to 3 times their loaded cost once you account for materials markup, slow days, and your time managing them.
Loaded cost reality check
A $25/hour employee rarely costs you $25. Add payroll taxes, workers comp, liability insurance, tools, vehicle time, and non-billable hours, and the true cost often lands closer to $38 to $45 per hour worked.
A worked numeric example
Say you want to hire a laborer at $25 per hour. Here is a realistic look at what you are actually committing to and what they need to produce.
- Base wage: $25/hour.
- Payroll taxes and workers comp: add roughly 25 to 30 percent, call it $7/hour.
- Non-billable time (drive, loading, rain days): figure about 15 percent, which effectively raises your cost per billable hour.
- Loaded cost per billable hour: roughly $40 to $44.
Now the upside. If that employee frees you from demo, prep, and cleanup, you can spend those hours on skilled work and client decisions. On a typical remodel you might bill the laborer's time at $55 to $75 per hour through your pricing. At $65 billed against a $42 loaded cost, you net about $23 per hour on their labor, before counting the extra jobs you can now take because you are not buried in grunt work. Over a 40-hour week that is roughly $900 in direct margin, plus the far bigger gain of adding another full job to your schedule.
The catch: those numbers only hold if the person stays productive and you keep the schedule full. An employee sitting idle between jobs is pure loss, so hiring and scheduling have to move together.
What to delegate first
Do not hire a mini-you on day one. Your first hire should take the low-skill, high-volume tasks off your plate so you stay on the work that only you can do and the work that clients are paying a premium for.
Start with the repeatable stuff:
- Demo and site prep: floor protection, masking, hauling out old cabinets and fixtures.
- Material runs and staging so you are not losing two hours at the supply house.
- Cleanup and daily job site reset, which also protects your reputation with homeowners.
- Basic carpentry and prep you can inspect quickly: blocking, backing, simple framing, sanding.
Hold back the things that carry risk or define your brand until you trust them: final finishes, client walkthroughs, change-order conversations, and anything that fails an inspection. Those come later, once you have watched how they work.
Write down the standard
The fastest way to get a new hire productive is a short, specific punch list for each task: how you protect floors, how clean the site must be at end of day, what a finished prep looks like. Verbal instructions get forgotten; a simple checklist does not.
Keeping jobs coordinated with more than one person
When you were solo, the schedule lived in your head and that was fine. The moment a second person is in the field, that stops working. Now you need everyone to know where to be, what the scope is for the day, and what to do when something changes.
Three things have to be solid:
- A shared schedule everyone can see, not a text thread you have to re-explain every morning.
- A clear daily scope for each job so the crew knows what done looks like before they start.
- A fast feedback loop: photos, a quick note, a flag when materials run short, so you are not driving across town to find out.
The failure mode here is you becoming a human dispatcher, spending your productive hours on the phone relaying who goes where. If hiring just turns you into a coordinator, you have not actually bought back any time. The goal is to set the day up once and let the system carry it.
Payroll, paperwork, and staying legal
Hiring your first employee means a few boxes you cannot skip. Get an EIN if you do not have one, set up workers compensation coverage (required in most states for employees), and handle withholding and payroll taxes properly. Classifying a real employee as a 1099 contractor to save money is a common shortcut that gets remodelers audited and fined. If the person uses your tools, follows your schedule, and works only for you, they are almost certainly an employee.
It is worth a one-time conversation with a bookkeeper or payroll service. The cost is small next to the penalties, and it frees you to focus on running jobs instead of untangling tax notices later.
Make the first 30 days count
The first month sets the tone. Spend real time on the job with your new hire instead of dropping them off and leaving. Show them your standard, correct early so bad habits do not set in, and give direct feedback. A good first hire who sticks around for years is worth far more than the hassle of training, so treat the ramp-up as an investment, not a cost.
Also protect your own time. The whole point of this hire is to get you off the tasks that do not need your skill and back onto selling, bidding, and finishing work at a premium. Track where your hours actually go in the first few weeks and adjust what you delegate.
Brivium keeps your crew on the same page: branded quotes clients approve fast, a shared schedule so everyone knows the day's jobs, and card payments and invoices that get you paid before the next start date.
Start free trialThe bottom line
Hiring your first remodeling employee is less about finding the perfect person and more about proving your business can stay full and coordinated with two sets of hands instead of one. Watch the numbers, delegate the repeatable work first, get the paperwork right, and build a simple system so you lead the crew instead of chasing it. Do that and the second hire gets a lot easier.
Frequently asked questions
How do I know I am ready to hire my first remodeling employee?
The clearest signs are turning down profitable work and a backlog pushing 4 to 6 weeks. Make sure your margins can cover the loaded cost of an employee, which is typically 1.5 to 1.8 times their base wage.
What should I delegate to my first hire?
Start with repeatable, lower-skill tasks: demo, site prep, material runs, cleanup, and basic carpentry you can inspect quickly. Keep finishes, client walkthroughs, and change orders until you trust their work.
Can I pay my first worker as a 1099 contractor?
Usually no. If they use your tools, follow your schedule, and work only for you, the IRS treats them as an employee. Misclassifying to save on taxes risks audits and penalties, so set up proper payroll and workers comp.
How do I keep jobs coordinated once a second person is in the field?
Use a shared schedule everyone can see, give each job a clear daily scope, and set up a fast way to get photos and updates. The aim is to plan the day once rather than spend your hours dispatching by phone.
