Handyman
Hiring Your First Handyman Employee

You can only swing a hammer so many hours a day. At some point the calls keep coming, the backlog stretches out two or three weeks, and you start turning away work you wish you could take. That is usually the moment handyman owners start thinking about hiring a handyman employee. But going from solo to a crew is not just about getting an extra set of hands. It changes how you quote, schedule, and get paid. This post walks through when the numbers actually justify a hire, what to hand off first, and how to keep jobs coordinated once more than one person is in the field.
Key takeaways
- Hire when you are consistently booked out 2+ weeks and turning away profitable work, not when you just feel busy.
- Delegate the repeatable, lower-skill jobs first and keep the complex or client-sensitive work yourself at the start.
- A new hire has to generate roughly 2.5 to 3 times their wage in billable revenue to pay off once you add taxes, tools, and overhead.
- Shared scheduling and standardized quotes matter more than ever the day you have two trucks on the road.
Know When the Numbers Justify a Hire
Feeling busy is not the same as being ready to hire. Busy comes and goes. What you want to see is a steady pattern: you are booked out two weeks or more, you are declining jobs you would normally take, and the declined work is profitable, not just price shoppers. If demand holds for a couple of months straight, the market is telling you it can absorb another worker.
The other half of the decision is cash. A new employee is not just their hourly wage. Once you add payroll taxes, workers' comp, a phone, basic tools, fuel, and the hours you spend training and checking their work, the real cost runs well above the base rate. A common rule of thumb: a field employee needs to produce about 2.5 to 3 times their wage in billable revenue before they are truly paying for themselves and contributing to profit.
A Worked Example
Say you hire a handyman at 25 dollars an hour. Here is roughly what that looks like fully loaded:
- Base wage: 25 dollars/hour
- Payroll taxes, workers' comp, and benefits (typical 20 to 30 percent): about 6 dollars/hour
- Tools, phone, fuel, and other overhead spread across hours: about 5 dollars/hour
- Fully loaded cost: roughly 36 dollars/hour
If you bill that person's work at 65 dollars/hour and they are billable 30 hours of a 40-hour week (the rest is driving, loading, and downtime), they generate 1,950 dollars/week in revenue against about 1,440 dollars/week in loaded cost. That is roughly 510 dollars/week in gross margin, or about 2,000 dollars a month, before your own management time. Not bad. But notice how sensitive it is: if billable hours drop to 20 a week, revenue falls to 1,300 dollars and you are barely breaking even. The lesson is that keeping a new hire billable is the whole game, and that comes down to scheduling and a full pipeline.
Build a cushion first
Have 2 to 3 months of payroll for the new hire set aside before you make the offer. The first month is almost always slower than you expect while they ramp up.
What to Delegate First
The instinct is to hand off the jobs you hate. Resist that. Delegate based on risk and repeatability, not on your personal preference. The best first jobs to give a new hire are the ones that are straightforward, hard to mess up, and forgiving if they take a little longer than you would.
- Repeatable tasks: TV mounts, blind and shelf installs, furniture assembly, caulking, basic drywall patches.
- Clear-scope jobs where the finished result is obvious and easy to check.
- Lower-stakes clients where a small hiccup will not cost you a key referral source.
Keep for yourself, at least early on: the complex multi-trade jobs, anything involving your best or most demanding clients, and the first walkthrough on big estimates. Your judgment is the product on those. As the new hire proves out, you widen their lane.
Write down how you do it
You do not need a 50-page manual. A few short checklists for your most common jobs go a long way: what to bring, how you want it done, what photos to send you when it is finished. This is the difference between training once and answering the same question every day.
Keep Jobs Coordinated With Two in the Field
Solo, your schedule lives in your head and that works fine. The day you add a second person, that stops working. Now you have two calendars, two sets of materials, two trucks, and a client who calls expecting one answer. Coordination becomes the job you did not know you signed up for.
A few habits keep the wheels on:
- Use one shared schedule everyone can see on their phone, with address, scope, and client notes on each job.
- Do a 5-minute morning check so everyone knows their first stop and what to load.
- Require a quick status update when a job finishes: done, needs a return trip, or ran into a surprise.
- Route one phone line so client calls do not scatter across personal cell numbers.
The goal is that you always know where both people are and what state each job is in without a dozen text messages. That visibility is what lets you keep that new hire billable, which is exactly what makes the hire pay off.
Standardize Your Quotes and Invoices Before You Grow
When you are solo, an inconsistent quote is your problem alone. With a crew, inconsistency multiplies. If your employee quotes a job differently than you would, or forgets to invoice a change order, that is margin walking out the door. Before you hand off estimating, lock in standard line items and pricing so a quote looks the same whether it comes from you or your new hire.
Same with getting paid. The faster a finished job turns into a sent invoice and a collected payment, the less cash gets stuck. With two people producing work, it is very easy for invoices to pile up unsent. Make invoicing part of closing out the job, not a weekend chore.
Brivium keeps a growing handyman crew on the same page with branded quotes anyone can send, scheduling you can see from the field, and card payments so finished jobs turn into cash the same day.
Start free trialProtect Yourself and Set Expectations
A first hire means a few things you probably skipped as a solo operator. Make sure you have employer identification set up, workers' comp if your state requires it, and the right classification. Paying someone as a 1099 contractor when they work like an employee is a common and expensive mistake, so check your state rules or ask your accountant.
Set expectations clearly on day one: work hours, how you handle drive time, who buys materials, phone and photo requirements, and what quality looks like. Most first-hire friction comes from fuzzy expectations, not bad workers. Write the important stuff down and your crew will run far smoother.
Going from one to two is the hardest step you will take in your business. Get the numbers right, delegate the right work, and keep everyone coordinated, and that first hire becomes the foundation for a crew that lets you finally step back from the tools when you choose to.
Frequently asked questions
How do I know I'm ready to hire my first handyman employee?
You're ready when you've been booked out two or more weeks for a couple of months straight and are turning away profitable work. Pair that demand with 2 to 3 months of payroll set aside as a cushion.
How much revenue does a handyman employee need to generate?
A good rule of thumb is 2.5 to 3 times their wage in billable revenue once you add payroll taxes, workers' comp, tools, fuel, and overhead. Keeping them billable 30-plus hours a week is what makes the hire profitable.
What jobs should I delegate to a new handyman hire first?
Start with repeatable, low-risk jobs like TV mounts, assembly, blind installs, and caulking for lower-stakes clients. Keep complex multi-trade work and your best clients to yourself until the new hire proves out.
Should my first hire be a 1099 contractor or a W-2 employee?
If they work your schedule with your tools and direction, they're usually a W-2 employee, not a 1099 contractor. Misclassifying is a costly mistake, so confirm with your accountant or your state labor rules.
