Fencing
Hiring Your First Fencing Employee

Going from a one-person fencing operation to a crew is one of the biggest jumps you will make. You know the work. The question is whether you can afford help, what to hand off first, and how to keep two or more people moving in the same direction without jobs falling through the cracks. This post walks through the real math and the practical first steps so hiring your first fencing employee does not quietly cost you money.
Key takeaways
- Hire when you are turning down work or routinely burning evenings on admin, not just when you feel busy.
- Your first hire should offload labor and travel-heavy tasks, freeing you for quoting and customer contact.
- A simple cost-per-hour calculation tells you whether a new body actually adds profit.
- Shared scheduling and job notes keep a two-person operation from drifting apart in the field.
Know when the numbers justify a hire
The wrong time to hire is when you feel slammed for a week. Busy seasons come and go. The right time is when you are consistently turning away jobs you could win, or when admin is eating the hours you should spend selling and building. If you are quoting at midnight because daylight goes to installs, that is a capacity problem a hire can fix.
Look for these signals over a 60 to 90 day window, not a single stretch:
- You are declining or delaying quotes because your calendar is full.
- Your backlog is pushing install dates out several weeks and customers are walking.
- You are working more than 55 hours a week and still falling behind on invoicing.
- You have steady lead flow, not a one-time spike you cannot repeat.
If only one of those is true, fix the process first. If three or four are true, a hire is probably overdue.
Run the simple math before you commit
An employee has to pay for themselves plus a margin, or you are just buying yourself a second job with more stress. The fastest way to sanity-check this is cost per billable hour versus what that hour produces in revenue.
Here is a worked example for a laborer or installer helper:
- Wage: $22/hour.
- Payroll taxes, workers comp, and overhead load: roughly 25 to 40 percent on top. Use 35 percent here, so about $7.70.
- Fully loaded cost: about $29.70 per hour worked.
- Not every paid hour is billable. Drive time, loading, and slow stretches mean maybe 75 percent of paid hours produce billable work.
So your true cost per billable hour is closer to $29.70 divided by 0.75, which is about $39.60. If adding this person lets you bill a crew at $95 to $120 per hour on installs, the spread covers their cost and still adds profit. The second person often does more than their own hours too, because together you install faster: two people setting posts and stretching fabric beat one person doing both sequentially.
A quick gut check
If one extra person lets you take on even one additional average job per week, the added revenue usually dwarfs the added payroll. Run your own numbers with your real crew rate and job size before you believe anyone else's.
Decide what to delegate first
New owners often delegate the wrong thing. They hand off the customer-facing, judgment-heavy work and keep the shovel. Flip that. Your first hire should take the physical, repeatable, and travel-heavy work so you keep the parts that win and protect jobs: quoting, site walks, and customer communication.
Good first tasks to hand off:
- Digging, setting posts, and mixing concrete.
- Loading and unloading materials and tool prep.
- Material runs to the supply house.
- Teardown of old fence and site cleanup.
- Panel and fabric installation under your direction.
Hold onto these yourself at the start:
- Measuring and quoting new work.
- Final layout and line setting, where mistakes are expensive.
- Customer walkthroughs and change orders.
- Collecting payment and sign-off.
Over time a strong hire earns more responsibility. But in month one, you want them productive on things that are hard to get wrong, not learning layout on your dime.
Classify and onboard them correctly
In US fencing, your first hire is almost always a W-2 employee, not a 1099 contractor. If you control their hours, provide the tools, and direct how the work gets done, the IRS generally treats them as an employee. Misclassifying to save on taxes is a common and expensive mistake. When in doubt, talk to a bookkeeper or payroll service.
Before day one, line up the basics:
- Workers compensation coverage. This is non-negotiable with digging and lifting involved.
- A payroll setup so taxes are withheld and paid correctly.
- Basic safety gear and a short safety briefing: trenching awareness, lifting, and utility locates.
- Confirm 811 call-before-you-dig is part of every job, and that your new hire knows the rule.
- A simple written agreement covering pay, hours, and expectations.
None of this has to be fancy. It has to exist before someone gets hurt or the IRS asks questions.
Keep jobs coordinated once you are two in the field
Here is where many solo operators stumble. When it was just you, everything lived in your head. The address, the gate location, the materials in the trailer, what the customer wanted. The moment a second person is working, that mental model has to become visible, or you will spend half your day on the phone answering questions.
Build a few habits that scale:
- Every job gets a written scope with measurements, materials, and any customer notes, accessible to both of you.
- Use one shared schedule so your crew member knows where to be and when, without a morning text chain.
- Photograph the site and layout so expectations are not a memory game.
- Set a daily check-in, even five minutes, to confirm the next day's plan and materials.
The goal is simple: your hire should be able to start and keep moving without calling you every twenty minutes. That only happens when job details live somewhere you both can see.
Brivium keeps a two-person fencing crew on the same page with branded quotes, shared scheduling, and job notes your helper can open in the field, plus card payments so you still get paid the day the fence goes up.
Start free trialProtect your cash flow through the transition
Payroll is a fixed cost that shows up whether or not a customer pays on time. That changes your cash picture. As a solo operator you could float a slow-paying customer for a couple of weeks. With payroll running, slow collections hurt faster.
Tighten the money side before and during the hire:
- Collect a deposit on every install to cover materials and early labor.
- Invoice the day the job is done, not at the end of the week.
- Offer card payment on site so you are not waiting on checks.
- Keep a small cash buffer, ideally a few weeks of payroll, before you bring someone on.
Hiring is a growth move, but growth that outruns your cash is how good fencing businesses stall. Pair the new capacity with faster collections and the first hire becomes the foundation of a real crew instead of a scary monthly bill.
Frequently asked questions
How do I know I can afford to hire a fencing employee?
Calculate their fully loaded cost per billable hour, including wages, payroll taxes, workers comp, and non-billable time, then compare it to your crew install rate. If the spread is healthy and you have steady lead flow, you can likely afford the hire.
Should my first fencing hire be a W-2 employee or a 1099 contractor?
Usually a W-2 employee. If you control their schedule, supply the tools, and direct how the work is done, the IRS generally treats them as an employee. Misclassifying to dodge taxes is risky and costly, so confirm with a payroll service or bookkeeper.
What should I delegate first when I hire help?
Hand off the physical, repeatable, travel-heavy work first: digging, setting posts, material runs, teardown, and installation under your direction. Keep measuring, quoting, final layout, and customer communication until your hire proves they can handle more.
How do I keep jobs coordinated with more than one person in the field?
Make job details visible instead of keeping them in your head. Use a written scope with measurements and notes, a shared schedule, site photos, and a quick daily check-in so your crew member can keep working without constant calls.
