Electrical
Hiring Your First Electrical Employee

Going from solo to a two-person crew is one of the biggest jumps you will make as an electrical contractor. Done right, it doubles your capacity and frees you to sell more work. Done too early or without a plan, it can bury you in payroll stress and sloppy jobs. This is a contractor-to-contractor look at when the numbers justify hiring your first electrical employee, what to hand off first, and how to keep everyone coordinated once there is more than one truck on the road.
Key takeaways
- Hire when you are consistently turning down or delaying work, not just when you feel busy.
- Your first hire should take over the tasks that do not require your license or your quoting judgment.
- Coordination problems, not skill problems, are what sink most new crews.
- Write down your process before you train someone, so the standard does not live only in your head.
When the numbers actually justify a hire
Feeling swamped is not the same as being ready to hire. The real signal is a backlog of profitable work you cannot get to. If you are regularly pushing jobs two or three weeks out, or turning down service calls because your day is full, demand is outrunning your capacity. That is the point where another set of hands pays for itself.
Run the math before you post a job ad. A fully loaded employee costs more than their hourly wage once you add payroll taxes, workers' comp, a phone, tools, and some truck time. A common rule of thumb: your true cost per employee hour is roughly 1.3 to 1.5 times their base wage.
Worked example
Say you pay a helper $24 per hour. At a 1.4 multiplier, your loaded cost is about $33.60 per hour. If you bill their work at $85 per hour and keep them productive 30 billable hours a week, that is $2,550 in revenue against roughly $1,344 in loaded wage cost. The gap, about $1,200 a week, covers overhead and profit. The question is whether you have enough steady work to keep those 30 hours filled every week, not just during a busy stretch.
If you cannot honestly fill 25 to 30 billable hours a week for the next few months, you are not hiring yet. You are hoping. Keep subbing out overflow or stacking work until the backlog is real and consistent.
What to delegate first
Your first hire is almost never a mirror of you. The goal is to offload the work that does not require your license, your pricing judgment, or your customer relationships, so you can spend more time on the high-value parts of the business.
Start by delegating the tasks that are repeatable and lower-risk:
- Rough-in work, pulling wire, and mounting boxes under your direction
- Material pickups and job-site cleanup
- Demo and prep that eats your billable hours
- Simple service calls once the person has proven reliable
- Loading and stocking the truck for the next day
Hold on to the things that protect your margin and reputation: quoting, final inspections, permit-sensitive work, panel changes, and anything a customer will judge you on. A good helper or apprentice earns more responsibility over time. Give it in layers, not all at once.
Tip
Whatever you delegate, write down how you want it done before you hand it off. A one-page checklist for truck stocking or job cleanup beats repeating yourself on every call.
Helper, apprentice, or licensed journeyman?
Your first hire usually falls into one of three buckets, and each changes your math and your management load.
Helper or laborer
Lowest cost, lowest risk, most supervision. Great if your bottleneck is grunt work and you want to stay on the tools yourself. They cannot run a job alone.
Apprentice
A longer-term play. You invest in training in exchange for a loyal, growing tech. Check your state's apprenticeship and ratio rules before you commit, since many states limit how many apprentices one licensed electrician can supervise.
Licensed journeyman
Most expensive, least supervision. This is the hire that actually lets you split into two trucks and take on separate jobs at once. It only works if you have enough volume to keep a second crew busy and enough margin in your pricing to cover a journeyman wage.
Keeping jobs coordinated once you are not solo
Here is the honest part: most first hires do not fail on skill. They fail on coordination. When you were solo, the whole schedule lived in your head. Add one more person in the field and that stops working. Nobody knows which job is next, what materials are on the truck, or whether the customer was already called.
You need a single source of truth that both of you check every morning. That means every job has:
- A clear address, scope, and point of contact
- Scheduled start time and expected duration
- Materials needed, and who is picking them up
- Notes and photos from the last visit if it is a repeat
- A way to log hours and mark the job complete
When this lives on paper, in texts, or in your memory, things slip. Double-booked windows, missed callbacks, and a tech standing on a porch without the right breaker are all symptoms of one problem: no shared, current view of the day.
Reality check
The first month with a new hire will feel slower, not faster. You are training, correcting, and setting standards. Expect a dip before the lift. Push through it and your capacity opens up.
Protect your brand and your cash flow
With two people representing your company, consistency matters more. The customer should get the same experience whether you show up or your tech does: branded quotes, clear communication, and clean invoices. A sloppy handoff on either side costs you reviews and repeat work.
Cash flow also gets tighter the week your payroll doubles. You are now paying a wage every Friday whether or not customers have paid you. Tighten up your invoicing so you are not floating your crew's pay on your own account. Bill the day the job is done, offer card payment on site, and chase anything past due quickly.
Brivium keeps your whole crew on the same schedule, puts branded quotes in customers' hands fast, and lets you take card payments on site so you get paid the day the job wraps, not three weeks later.
Start free trialA simple first-30-days plan
- Week 1: Shadow only. Your new hire rides with you, learns your standards, and handles cleanup, prep, and material runs.
- Week 2: Delegate defined tasks on each job while you stay close and inspect the work.
- Week 3: Assign full rough-in or simple service calls, checked at the end of the day.
- Week 4: Review what is working, adjust pay or responsibility if earned, and decide whether to split trucks.
Hiring your first electrical employee is a turning point, not a magic fix. Run the numbers honestly, delegate the right work first, and build a coordination habit before the jobs pile up. Do that, and your first hire becomes the reason you can finally grow instead of just stay busy.
Frequently asked questions
How much work do I need before hiring my first electrical employee?
Enough steady, profitable work to fill roughly 25 to 30 billable hours per week for the next few months. If you are consistently delaying or turning down jobs, you are likely ready. A busy stretch alone is not enough.
What is the true cost of an electrical employee beyond their wage?
Plan for about 1.3 to 1.5 times their base wage once you add payroll taxes, workers' comp, tools, a phone, and truck time. A $24 per hour helper often costs around $33 to $36 per hour loaded.
Should my first hire be a helper or a licensed journeyman?
A helper or apprentice is cheaper and keeps you on the tools, but needs supervision. A journeyman lets you run a second truck independently but costs more and only pays off if you have enough volume to keep them busy.
What is the biggest mistake when going from solo to a crew?
Poor coordination. Most first hires fail on communication, not skill. Use a single shared schedule both of you check daily, with each job's scope, materials, and contact, so nobody shows up unprepared or double-booked.
